qemu/hw/m68k/q800-glue.c
Mark Cave-Ayland 101b4764c7 q800-glue.c: switch TypeInfo registration to use DEFINE_TYPES() macro
The use of the DEFINE_TYPES() macro will soon be recommended over the use of
calling type_init() directly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22 09:22:15 +02:00

250 lines
6.5 KiB
C

/*
* QEMU q800 logic GLUE (General Logic Unit)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "cpu.h"
#include "hw/m68k/q800-glue.h"
#include "hw/boards.h"
#include "hw/irq.h"
#include "hw/nmi.h"
#include "hw/qdev-properties.h"
#include "migration/vmstate.h"
/*
* The GLUE (General Logic Unit) is an Apple custom integrated circuit chip
* that performs a variety of functions (RAM management, clock generation, ...).
* The GLUE chip receives interrupt requests from various devices,
* assign priority to each, and asserts one or more interrupt line to the
* CPU.
*/
/*
* The GLUE logic on the Quadra 800 supports 2 different IRQ routing modes
* controlled from the VIA1 auxmode GPIO (port B bit 6) which are documented
* in NetBSD as follows:
*
* A/UX mode (Linux, NetBSD, auxmode GPIO low)
*
* Level 0: Spurious: ignored
* Level 1: Software
* Level 2: VIA2 (except ethernet, sound)
* Level 3: Ethernet
* Level 4: Serial (SCC)
* Level 5: Sound
* Level 6: VIA1
* Level 7: NMIs: parity errors, RESET button, YANCC error
*
* Classic mode (default: used by MacOS, A/UX 3.0.1, auxmode GPIO high)
*
* Level 0: Spurious: ignored
* Level 1: VIA1 (clock, ADB)
* Level 2: VIA2 (NuBus, SCSI)
* Level 3:
* Level 4: Serial (SCC)
* Level 5:
* Level 6:
* Level 7: Non-maskable: parity errors, RESET button
*
* Note that despite references to A/UX mode in Linux and NetBSD, at least
* A/UX 3.0.1 still uses Classic mode.
*/
static void GLUE_set_irq(void *opaque, int irq, int level)
{
GLUEState *s = opaque;
int i;
if (s->auxmode) {
/* Classic mode */
switch (irq) {
case GLUE_IRQ_IN_VIA1:
irq = 0;
break;
case GLUE_IRQ_IN_VIA2:
irq = 1;
break;
case GLUE_IRQ_IN_SONIC:
/* Route to VIA2 instead */
qemu_set_irq(s->irqs[GLUE_IRQ_NUBUS_9], level);
return;
case GLUE_IRQ_IN_ESCC:
irq = 3;
break;
case GLUE_IRQ_IN_NMI:
irq = 6;
break;
default:
g_assert_not_reached();
}
} else {
/* A/UX mode */
switch (irq) {
case GLUE_IRQ_IN_VIA1:
irq = 5;
break;
case GLUE_IRQ_IN_VIA2:
irq = 1;
break;
case GLUE_IRQ_IN_SONIC:
irq = 2;
break;
case GLUE_IRQ_IN_ESCC:
irq = 3;
break;
case GLUE_IRQ_IN_NMI:
irq = 6;
break;
default:
g_assert_not_reached();
}
}
if (level) {
s->ipr |= 1 << irq;
} else {
s->ipr &= ~(1 << irq);
}
for (i = 7; i >= 0; i--) {
if ((s->ipr >> i) & 1) {
m68k_set_irq_level(s->cpu, i + 1, i + 25);
return;
}
}
m68k_set_irq_level(s->cpu, 0, 0);
}
static void glue_auxmode_set_irq(void *opaque, int irq, int level)
{
GLUEState *s = GLUE(opaque);
s->auxmode = level;
}
static void glue_nmi(NMIState *n, int cpu_index, Error **errp)
{
GLUEState *s = GLUE(n);
/* Hold NMI active for 100ms */
GLUE_set_irq(s, GLUE_IRQ_IN_NMI, 1);
timer_mod(s->nmi_release, qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + 100);
}
static void glue_nmi_release(void *opaque)
{
GLUEState *s = GLUE(opaque);
GLUE_set_irq(s, GLUE_IRQ_IN_NMI, 0);
}
static void glue_reset(DeviceState *dev)
{
GLUEState *s = GLUE(dev);
s->ipr = 0;
s->auxmode = 0;
timer_del(s->nmi_release);
}
static const VMStateDescription vmstate_glue = {
.name = "q800-glue",
.version_id = 0,
.minimum_version_id = 0,
.fields = (VMStateField[]) {
VMSTATE_UINT8(ipr, GLUEState),
VMSTATE_UINT8(auxmode, GLUEState),
VMSTATE_TIMER_PTR(nmi_release, GLUEState),
VMSTATE_END_OF_LIST(),
},
};
/*
* If the m68k CPU implemented its inbound irq lines as GPIO lines
* rather than via the m68k_set_irq_level() function we would not need
* this cpu link property and could instead provide outbound IRQ lines
* that the board could wire up to the CPU.
*/
static Property glue_properties[] = {
DEFINE_PROP_LINK("cpu", GLUEState, cpu, TYPE_M68K_CPU, M68kCPU *),
DEFINE_PROP_END_OF_LIST(),
};
static void glue_finalize(Object *obj)
{
GLUEState *s = GLUE(obj);
timer_free(s->nmi_release);
}
static void glue_init(Object *obj)
{
DeviceState *dev = DEVICE(obj);
GLUEState *s = GLUE(dev);
qdev_init_gpio_in(dev, GLUE_set_irq, 8);
qdev_init_gpio_in_named(dev, glue_auxmode_set_irq, "auxmode", 1);
qdev_init_gpio_out(dev, s->irqs, 1);
/* NMI release timer */
s->nmi_release = timer_new_ms(QEMU_CLOCK_VIRTUAL, glue_nmi_release, s);
}
static void glue_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
NMIClass *nc = NMI_CLASS(klass);
dc->vmsd = &vmstate_glue;
dc->reset = glue_reset;
device_class_set_props(dc, glue_properties);
nc->nmi_monitor_handler = glue_nmi;
}
static const TypeInfo glue_info_types[] = {
{
.name = TYPE_GLUE,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(GLUEState),
.instance_init = glue_init,
.instance_finalize = glue_finalize,
.class_init = glue_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_NMI },
{ }
},
},
};
DEFINE_TYPES(glue_info_types)