qemu/tests/qtest/xlnx-canfd-test.c
Vikram Garhwal 8976fd2b5e tests/qtest: Introduce tests for Xilinx VERSAL CANFD controller
The QTests perform three tests on the Xilinx VERSAL CANFD controller:
    Tests the CANFD controllers in loopback.
    Tests the CANFD controllers in normal mode with CAN frame.
    Tests the CANFD controllers in normal mode with CANFD frame.

Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06 10:19:31 +01:00

424 lines
15 KiB
C

/*
* SPDX-License-Identifier: MIT
*
* QTests for the Xilinx Versal CANFD controller.
*
* Copyright (c) 2022 AMD Inc.
*
* Written-by: Vikram Garhwal<vikram.garhwal@amd.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "libqtest.h"
/* Base address. */
#define CANFD0_BASE_ADDR 0xff060000
#define CANFD1_BASE_ADDR 0xff070000
/* Register addresses. */
#define R_SRR_OFFSET 0x00
#define R_MSR_OFFSET 0x04
#define R_FILTER_CONTROL_REGISTER 0xe0
#define R_SR_OFFSET 0x18
#define R_ISR_OFFSET 0x1c
#define R_IER_OFFSET 0x20
#define R_ICR_OFFSET 0x24
#define R_TX_READY_REQ_REGISTER 0x90
#define RX_FIFO_STATUS_REGISTER 0xe8
#define R_TXID_OFFSET 0x100
#define R_TXDLC_OFFSET 0x104
#define R_TXDATA1_OFFSET 0x108
#define R_TXDATA2_OFFSET 0x10c
#define R_AFMR_REGISTER0 0xa00
#define R_AFIR_REGISTER0 0xa04
#define R_RX0_ID_OFFSET 0x2100
#define R_RX0_DLC_OFFSET 0x2104
#define R_RX0_DATA1_OFFSET 0x2108
#define R_RX0_DATA2_OFFSET 0x210c
/* CANFD modes. */
#define SRR_CONFIG_MODE 0x00
#define MSR_NORMAL_MODE 0x00
#define MSR_LOOPBACK_MODE (1 << 1)
#define ENABLE_CANFD (1 << 1)
/* CANFD status. */
#define STATUS_CONFIG_MODE (1 << 0)
#define STATUS_NORMAL_MODE (1 << 3)
#define STATUS_LOOPBACK_MODE (1 << 1)
#define ISR_TXOK (1 << 1)
#define ISR_RXOK (1 << 4)
#define ENABLE_ALL_FILTERS 0xffffffff
#define ENABLE_ALL_INTERRUPTS 0xffffffff
/* We are sending one canfd message. */
#define TX_READY_REG_VAL 0x1
#define FIRST_RX_STORE_INDEX 0x1
#define STATUS_REG_MASK 0xf
#define DLC_FD_BIT_SHIFT 0x1b
#define DLC_FD_BIT_MASK 0xf8000000
#define FIFO_STATUS_READ_INDEX_MASK 0x3f
#define FIFO_STATUS_FILL_LEVEL_MASK 0x7f00
#define FILL_LEVEL_SHIFT 0x8
/* CANFD frame size ID, DLC and 16 DATA word. */
#define CANFD_FRAME_SIZE 18
/* CAN frame size ID, DLC and 2 DATA word. */
#define CAN_FRAME_SIZE 4
/* Set the filters for CANFD controller. */
static void enable_filters(QTestState *qts)
{
const uint32_t arr_afmr[32] = { 0xb423deaa, 0xa2a40bdc, 0x1b64f486,
0x95c0d4ee, 0xe0c44528, 0x4b407904,
0xd2673f46, 0x9fc638d6, 0x8844f3d8,
0xa607d1e8, 0x67871bf4, 0xc2557dc,
0x9ea5b53e, 0x3643c0cc, 0x5a05ea8e,
0x83a46d84, 0x4a25c2b8, 0x93a66008,
0x2e467470, 0xedc66118, 0x9086f9f2,
0xfa23dd36, 0xb6654b90, 0xb221b8ca,
0x3467d1e2, 0xa3a55542, 0x5b26a012,
0x2281ea7e, 0xcea0ece8, 0xdc61e588,
0x2e5676a, 0x16821320 };
const uint32_t arr_afir[32] = { 0xa833dfa1, 0x255a477e, 0x3a4bb1c5,
0x8f560a6c, 0x27f38903, 0x2fecec4d,
0xa014c66d, 0xec289b8, 0x7e52dead,
0x82e94f3c, 0xcf3e3c5c, 0x66059871,
0x3f213df4, 0x25ac3959, 0xa12e9bef,
0xa3ad3af, 0xbafd7fe, 0xb3cb40fd,
0x5d9caa81, 0x2ed61902, 0x7cd64a0,
0x4b1fa538, 0x9b5ced8c, 0x150de059,
0xd2794227, 0x635e820a, 0xbb6b02cf,
0xbb58176, 0x570025bb, 0xa78d9658,
0x49d735df, 0xe5399d2f };
/* Passing the respective array values to all the AFMR and AFIR pairs. */
for (int i = 0; i < 32; i++) {
/* For CANFD0. */
qtest_writel(qts, CANFD0_BASE_ADDR + R_AFMR_REGISTER0 + 8 * i,
arr_afmr[i]);
qtest_writel(qts, CANFD0_BASE_ADDR + R_AFIR_REGISTER0 + 8 * i,
arr_afir[i]);
/* For CANFD1. */
qtest_writel(qts, CANFD1_BASE_ADDR + R_AFMR_REGISTER0 + 8 * i,
arr_afmr[i]);
qtest_writel(qts, CANFD1_BASE_ADDR + R_AFIR_REGISTER0 + 8 * i,
arr_afir[i]);
}
/* Enable all the pairs from AFR register. */
qtest_writel(qts, CANFD0_BASE_ADDR + R_FILTER_CONTROL_REGISTER,
ENABLE_ALL_FILTERS);
qtest_writel(qts, CANFD1_BASE_ADDR + R_FILTER_CONTROL_REGISTER,
ENABLE_ALL_FILTERS);
}
static void configure_canfd(QTestState *qts, uint8_t mode)
{
uint32_t status = 0;
/* Put CANFD0 and CANFD1 in config mode. */
qtest_writel(qts, CANFD0_BASE_ADDR + R_SRR_OFFSET, SRR_CONFIG_MODE);
qtest_writel(qts, CANFD1_BASE_ADDR + R_SRR_OFFSET, SRR_CONFIG_MODE);
/* Write mode of operation in Mode select register. */
qtest_writel(qts, CANFD0_BASE_ADDR + R_MSR_OFFSET, mode);
qtest_writel(qts, CANFD1_BASE_ADDR + R_MSR_OFFSET, mode);
enable_filters(qts);
/* Check here if CANFD0 and CANFD1 are in config mode. */
status = qtest_readl(qts, CANFD0_BASE_ADDR + R_SR_OFFSET);
status = status & STATUS_REG_MASK;
g_assert_cmpint(status, ==, STATUS_CONFIG_MODE);
status = qtest_readl(qts, CANFD1_BASE_ADDR + R_SR_OFFSET);
status = status & STATUS_REG_MASK;
g_assert_cmpint(status, ==, STATUS_CONFIG_MODE);
qtest_writel(qts, CANFD1_BASE_ADDR + R_IER_OFFSET, ENABLE_ALL_INTERRUPTS);
qtest_writel(qts, CANFD1_BASE_ADDR + R_IER_OFFSET, ENABLE_ALL_INTERRUPTS);
qtest_writel(qts, CANFD0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CANFD);
qtest_writel(qts, CANFD1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CANFD);
}
static void generate_random_data(uint32_t *buf_tx, bool is_canfd_frame)
{
/* Generate random TX data for CANFD frame. */
if (is_canfd_frame) {
for (int i = 0; i < CANFD_FRAME_SIZE - 2; i++) {
buf_tx[2 + i] = rand();
}
} else {
/* Generate random TX data for CAN frame. */
for (int i = 0; i < CAN_FRAME_SIZE - 2; i++) {
buf_tx[2 + i] = rand();
}
}
}
static void read_data(QTestState *qts, uint64_t can_base_addr, uint32_t *buf_rx)
{
uint32_t int_status;
uint32_t fifo_status_reg_value;
/* At which RX FIFO the received data is stored. */
uint8_t store_ind = 0;
bool is_canfd_frame = false;
/* Read the interrupt on CANFD rx. */
int_status = qtest_readl(qts, can_base_addr + R_ISR_OFFSET) & ISR_RXOK;
g_assert_cmpint(int_status, ==, ISR_RXOK);
/* Find the fill level and read index. */
fifo_status_reg_value = qtest_readl(qts, can_base_addr +
RX_FIFO_STATUS_REGISTER);
store_ind = (fifo_status_reg_value & FIFO_STATUS_READ_INDEX_MASK) +
((fifo_status_reg_value & FIFO_STATUS_FILL_LEVEL_MASK) >>
FILL_LEVEL_SHIFT);
g_assert_cmpint(store_ind, ==, FIRST_RX_STORE_INDEX);
/* Read the RX register data for CANFD. */
buf_rx[0] = qtest_readl(qts, can_base_addr + R_RX0_ID_OFFSET);
buf_rx[1] = qtest_readl(qts, can_base_addr + R_RX0_DLC_OFFSET);
is_canfd_frame = (buf_rx[1] >> DLC_FD_BIT_SHIFT) & 1;
if (is_canfd_frame) {
for (int i = 0; i < CANFD_FRAME_SIZE - 2; i++) {
buf_rx[i + 2] = qtest_readl(qts,
can_base_addr + R_RX0_DATA1_OFFSET + 4 * i);
}
} else {
buf_rx[2] = qtest_readl(qts, can_base_addr + R_RX0_DATA1_OFFSET);
buf_rx[3] = qtest_readl(qts, can_base_addr + R_RX0_DATA2_OFFSET);
}
/* Clear the RX interrupt. */
qtest_writel(qts, CANFD1_BASE_ADDR + R_ICR_OFFSET, ISR_RXOK);
}
static void write_data(QTestState *qts, uint64_t can_base_addr,
const uint32_t *buf_tx, bool is_canfd_frame)
{
/* Write the TX register data for CANFD. */
qtest_writel(qts, can_base_addr + R_TXID_OFFSET, buf_tx[0]);
qtest_writel(qts, can_base_addr + R_TXDLC_OFFSET, buf_tx[1]);
if (is_canfd_frame) {
for (int i = 0; i < CANFD_FRAME_SIZE - 2; i++) {
qtest_writel(qts, can_base_addr + R_TXDATA1_OFFSET + 4 * i,
buf_tx[2 + i]);
}
} else {
qtest_writel(qts, can_base_addr + R_TXDATA1_OFFSET, buf_tx[2]);
qtest_writel(qts, can_base_addr + R_TXDATA2_OFFSET, buf_tx[3]);
}
}
static void send_data(QTestState *qts, uint64_t can_base_addr)
{
uint32_t int_status;
qtest_writel(qts, can_base_addr + R_TX_READY_REQ_REGISTER,
TX_READY_REG_VAL);
/* Read the interrupt on CANFD for tx. */
int_status = qtest_readl(qts, can_base_addr + R_ISR_OFFSET) & ISR_TXOK;
g_assert_cmpint(int_status, ==, ISR_TXOK);
/* Clear the interrupt for tx. */
qtest_writel(qts, CANFD0_BASE_ADDR + R_ICR_OFFSET, ISR_TXOK);
}
static void match_rx_tx_data(const uint32_t *buf_tx, const uint32_t *buf_rx,
bool is_canfd_frame)
{
uint16_t size = 0;
uint8_t len = CAN_FRAME_SIZE;
if (is_canfd_frame) {
len = CANFD_FRAME_SIZE;
}
while (size < len) {
if (R_RX0_ID_OFFSET + 4 * size == R_RX0_DLC_OFFSET) {
g_assert_cmpint((buf_rx[size] & DLC_FD_BIT_MASK), ==,
(buf_tx[size] & DLC_FD_BIT_MASK));
} else {
if (!is_canfd_frame && size == 4) {
break;
}
g_assert_cmpint(buf_rx[size], ==, buf_tx[size]);
}
size++;
}
}
/*
* Xilinx CANFD supports both CAN and CANFD frames. This test will be
* transferring CAN frame i.e. 8 bytes of data from CANFD0 and CANFD1 through
* canbus. CANFD0 initiate the data transfer to can-bus, CANFD1 receives the
* data. Test compares the can frame data sent from CANFD0 and received on
* CANFD1.
*/
static void test_can_data_transfer(void)
{
uint32_t buf_tx[CAN_FRAME_SIZE] = { 0x5a5bb9a4, 0x80000000,
0x12345678, 0x87654321 };
uint32_t buf_rx[CAN_FRAME_SIZE] = { 0x00, 0x00, 0x00, 0x00 };
uint32_t status = 0;
generate_random_data(buf_tx, false);
QTestState *qts = qtest_init("-machine xlnx-versal-virt"
" -object can-bus,id=canbus"
" -machine canbus0=canbus"
" -machine canbus1=canbus"
);
configure_canfd(qts, MSR_NORMAL_MODE);
/* Check if CANFD0 and CANFD1 are in Normal mode. */
status = qtest_readl(qts, CANFD0_BASE_ADDR + R_SR_OFFSET);
status = status & STATUS_REG_MASK;
g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
status = qtest_readl(qts, CANFD1_BASE_ADDR + R_SR_OFFSET);
status = status & STATUS_REG_MASK;
g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
write_data(qts, CANFD0_BASE_ADDR, buf_tx, false);
send_data(qts, CANFD0_BASE_ADDR);
read_data(qts, CANFD1_BASE_ADDR, buf_rx);
match_rx_tx_data(buf_tx, buf_rx, false);
qtest_quit(qts);
}
/*
* This test will be transferring CANFD frame i.e. 64 bytes of data from CANFD0
* and CANFD1 through canbus. CANFD0 initiate the data transfer to can-bus,
* CANFD1 receives the data. Test compares the CANFD frame data sent from CANFD0
* with received on CANFD1.
*/
static void test_canfd_data_transfer(void)
{
uint32_t buf_tx[CANFD_FRAME_SIZE] = { 0x5a5bb9a4, 0xf8000000 };
uint32_t buf_rx[CANFD_FRAME_SIZE] = { 0x00, 0x00, 0x00, 0x00 };
uint32_t status = 0;
generate_random_data(buf_tx, true);
QTestState *qts = qtest_init("-machine xlnx-versal-virt"
" -object can-bus,id=canbus"
" -machine canbus0=canbus"
" -machine canbus1=canbus"
);
configure_canfd(qts, MSR_NORMAL_MODE);
/* Check if CANFD0 and CANFD1 are in Normal mode. */
status = qtest_readl(qts, CANFD0_BASE_ADDR + R_SR_OFFSET);
status = status & STATUS_REG_MASK;
g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
status = qtest_readl(qts, CANFD1_BASE_ADDR + R_SR_OFFSET);
status = status & STATUS_REG_MASK;
g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
write_data(qts, CANFD0_BASE_ADDR, buf_tx, true);
send_data(qts, CANFD0_BASE_ADDR);
read_data(qts, CANFD1_BASE_ADDR, buf_rx);
match_rx_tx_data(buf_tx, buf_rx, true);
qtest_quit(qts);
}
/*
* This test is performing loopback mode on CANFD0 and CANFD1. Data sent from
* TX of each CANFD0 and CANFD1 are compared with RX register data for
* respective CANFD Controller.
*/
static void test_can_loopback(void)
{
uint32_t buf_tx[CANFD_FRAME_SIZE] = { 0x5a5bb9a4, 0xf8000000 };
uint32_t buf_rx[CANFD_FRAME_SIZE] = { 0x00, 0x00, 0x00, 0x00 };
uint32_t status = 0;
generate_random_data(buf_tx, true);
QTestState *qts = qtest_init("-machine xlnx-versal-virt"
" -object can-bus,id=canbus"
" -machine canbus0=canbus"
" -machine canbus1=canbus"
);
configure_canfd(qts, MSR_LOOPBACK_MODE);
/* Check if CANFD0 and CANFD1 are set in correct loopback mode. */
status = qtest_readl(qts, CANFD0_BASE_ADDR + R_SR_OFFSET);
status = status & STATUS_REG_MASK;
g_assert_cmpint(status, ==, STATUS_LOOPBACK_MODE);
status = qtest_readl(qts, CANFD1_BASE_ADDR + R_SR_OFFSET);
status = status & STATUS_REG_MASK;
g_assert_cmpint(status, ==, STATUS_LOOPBACK_MODE);
write_data(qts, CANFD0_BASE_ADDR, buf_tx, true);
send_data(qts, CANFD0_BASE_ADDR);
read_data(qts, CANFD0_BASE_ADDR, buf_rx);
match_rx_tx_data(buf_tx, buf_rx, true);
generate_random_data(buf_tx, true);
write_data(qts, CANFD1_BASE_ADDR, buf_tx, true);
send_data(qts, CANFD1_BASE_ADDR);
read_data(qts, CANFD1_BASE_ADDR, buf_rx);
match_rx_tx_data(buf_tx, buf_rx, true);
qtest_quit(qts);
}
int main(int argc, char **argv)
{
g_test_init(&argc, &argv, NULL);
qtest_add_func("/net/canfd/can_data_transfer", test_can_data_transfer);
qtest_add_func("/net/canfd/canfd_data_transfer", test_canfd_data_transfer);
qtest_add_func("/net/canfd/can_loopback", test_can_loopback);
return g_test_run();
}