qemu/linux-user/syscall_defs.h
bellard 72f0390014 suppressed clashes
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@8 c046a42c-6fe2-441c-8c8c-71466251a162
2003-02-18 23:33:18 +00:00

284 lines
14 KiB
C

/* common syscall defines for all architectures */
#define SOCKOP_socket 1
#define SOCKOP_bind 2
#define SOCKOP_connect 3
#define SOCKOP_listen 4
#define SOCKOP_accept 5
#define SOCKOP_getsockname 6
#define SOCKOP_getpeername 7
#define SOCKOP_socketpair 8
#define SOCKOP_send 9
#define SOCKOP_recv 10
#define SOCKOP_sendto 11
#define SOCKOP_recvfrom 12
#define SOCKOP_shutdown 13
#define SOCKOP_setsockopt 14
#define SOCKOP_getsockopt 15
#define SOCKOP_sendmsg 16
#define SOCKOP_recvmsg 17
struct target_timeval {
target_long tv_sec;
target_long tv_usec;
};
struct target_iovec {
target_long iov_base; /* Starting address */
target_long iov_len; /* Number of bytes */
};
struct target_rusage {
struct target_timeval ru_utime; /* user time used */
struct target_timeval ru_stime; /* system time used */
target_long ru_maxrss; /* maximum resident set size */
target_long ru_ixrss; /* integral shared memory size */
target_long ru_idrss; /* integral unshared data size */
target_long ru_isrss; /* integral unshared stack size */
target_long ru_minflt; /* page reclaims */
target_long ru_majflt; /* page faults */
target_long ru_nswap; /* swaps */
target_long ru_inblock; /* block input operations */
target_long ru_oublock; /* block output operations */
target_long ru_msgsnd; /* messages sent */
target_long ru_msgrcv; /* messages received */
target_long ru_nsignals; /* signals received */
target_long ru_nvcsw; /* voluntary context switches */
target_long ru_nivcsw; /* involuntary " */
};
typedef struct {
int val[2];
} kernel_fsid_t;
struct kernel_statfs {
int f_type;
int f_bsize;
int f_blocks;
int f_bfree;
int f_bavail;
int f_files;
int f_ffree;
kernel_fsid_t f_fsid;
int f_namelen;
int f_spare[6];
};
/* mostly generic signal stuff */
#define TARGET_SIG_DFL ((target_long)0) /* default signal handling */
#define TARGET_SIG_IGN ((target_long)1) /* ignore signal */
#define TARGET_SIG_ERR ((target_long)-1) /* error return from signal */
#ifdef TARGET_MIPS
#define TARGET_NSIG 128
#else
#define TARGET_NSIG 64
#endif
#define TARGET_NSIG_BPW TARGET_LONG_BITS
#define TARGET_NSIG_WORDS (TARGET_NSIG / TARGET_NSIG_BPW)
typedef struct {
target_ulong sig[TARGET_NSIG_WORDS];
} target_sigset_t;
/* Networking ioctls */
#define TARGET_SIOCADDRT 0x890B /* add routing table entry */
#define TARGET_SIOCDELRT 0x890C /* delete routing table entry */
#define TARGET_SIOCGIFNAME 0x8910 /* get iface name */
#define TARGET_SIOCSIFLINK 0x8911 /* set iface channel */
#define TARGET_SIOCGIFCONF 0x8912 /* get iface list */
#define TARGET_SIOCGIFFLAGS 0x8913 /* get flags */
#define TARGET_SIOCSIFFLAGS 0x8914 /* set flags */
#define TARGET_SIOCGIFADDR 0x8915 /* get PA address */
#define TARGET_SIOCSIFADDR 0x8916 /* set PA address */
#define TARGET_SIOCGIFDSTADDR 0x8917 /* get remote PA address */
#define TARGET_SIOCSIFDSTADDR 0x8918 /* set remote PA address */
#define TARGET_SIOCGIFBRDADDR 0x8919 /* get broadcast PA address */
#define TARGET_SIOCSIFBRDADDR 0x891a /* set broadcast PA address */
#define TARGET_SIOCGIFNETMASK 0x891b /* get network PA mask */
#define TARGET_SIOCSIFNETMASK 0x891c /* set network PA mask */
#define TARGET_SIOCGIFMETRIC 0x891d /* get metric */
#define TARGET_SIOCSIFMETRIC 0x891e /* set metric */
#define TARGET_SIOCGIFMEM 0x891f /* get memory address (BSD) */
#define TARGET_SIOCSIFMEM 0x8920 /* set memory address (BSD) */
#define TARGET_SIOCGIFMTU 0x8921 /* get MTU size */
#define TARGET_SIOCSIFMTU 0x8922 /* set MTU size */
#define TARGET_SIOCSIFHWADDR 0x8924 /* set hardware address (NI) */
#define TARGET_SIOCGIFENCAP 0x8925 /* get/set slip encapsulation */
#define TARGET_SIOCSIFENCAP 0x8926
#define TARGET_SIOCGIFHWADDR 0x8927 /* Get hardware address */
#define TARGET_SIOCGIFSLAVE 0x8929 /* Driver slaving support */
#define TARGET_SIOCSIFSLAVE 0x8930
#define TARGET_SIOCADDMULTI 0x8931 /* Multicast address lists */
#define TARGET_SIOCDELMULTI 0x8932
/* Bridging control calls */
#define TARGET_SIOCGIFBR 0x8940 /* Bridging support */
#define TARGET_SIOCSIFBR 0x8941 /* Set bridging options */
#define TARGET_SIOCGIFTXQLEN 0x8942 /* Get the tx queue length */
#define TARGET_SIOCSIFTXQLEN 0x8943 /* Set the tx queue length */
/* ARP cache control calls. */
#define TARGET_OLD_SIOCDARP 0x8950 /* old delete ARP table entry */
#define TARGET_OLD_SIOCGARP 0x8951 /* old get ARP table entry */
#define TARGET_OLD_SIOCSARP 0x8952 /* old set ARP table entry */
#define TARGET_SIOCDARP 0x8953 /* delete ARP table entry */
#define TARGET_SIOCGARP 0x8954 /* get ARP table entry */
#define TARGET_SIOCSARP 0x8955 /* set ARP table entry */
/* RARP cache control calls. */
#define TARGET_SIOCDRARP 0x8960 /* delete RARP table entry */
#define TARGET_SIOCGRARP 0x8961 /* get RARP table entry */
#define TARGET_SIOCSRARP 0x8962 /* set RARP table entry */
/* Driver configuration calls */
#define TARGET_SIOCGIFMAP 0x8970 /* Get device parameters */
#define TARGET_SIOCSIFMAP 0x8971 /* Set device parameters */
/* DLCI configuration calls */
#define TARGET_SIOCADDDLCI 0x8980 /* Create new DLCI device */
#define TARGET_SIOCDELDLCI 0x8981 /* Delete DLCI device */
/* From <linux/fs.h> */
#define TARGET_BLKROSET TARGET_IO(0x12,93) /* set device read-only (0 = read-write) */
#define TARGET_BLKROGET TARGET_IO(0x12,94) /* get read-only status (0 = read_write) */
#define TARGET_BLKRRPART TARGET_IO(0x12,95) /* re-read partition table */
#define TARGET_BLKGETSIZE TARGET_IO(0x12,96) /* return device size /512 (long *arg) */
#define TARGET_BLKFLSBUF TARGET_IO(0x12,97) /* flush buffer cache */
#define TARGET_BLKRASET TARGET_IO(0x12,98) /* Set read ahead for block device */
#define TARGET_BLKRAGET TARGET_IO(0x12,99) /* get current read ahead setting */
#define TARGET_BLKFRASET TARGET_IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */
#define TARGET_BLKFRAGET TARGET_IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */
#define TARGET_BLKSECTSET TARGET_IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */
#define TARGET_BLKSECTGET TARGET_IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */
#define TARGET_BLKSSZGET TARGET_IO(0x12,104)/* get block device sector size */
/* A jump here: 108-111 have been used for various private purposes. */
#define TARGET_BLKBSZGET TARGET_IOR(0x12,112,sizeof(int))
#define TARGET_BLKBSZSET TARGET_IOW(0x12,113,sizeof(int))
#define TARGET_BLKGETSIZE64 TARGET_IOR(0x12,114,sizeof(uint64_t)) /* return device size in bytes (u64 *arg) */
#define TARGET_FIBMAP TARGET_IO(0x00,1) /* bmap access */
#define TARGET_FIGETBSZ TARGET_IO(0x00,2) /* get the block size used for bmap */
/* cdrom commands */
#define TARGET_CDROMPAUSE 0x5301 /* Pause Audio Operation */
#define TARGET_CDROMRESUME 0x5302 /* Resume paused Audio Operation */
#define TARGET_CDROMPLAYMSF 0x5303 /* Play Audio MSF (struct cdrom_msf) */
#define TARGET_CDROMPLAYTRKIND 0x5304 /* Play Audio Track/index
(struct cdrom_ti) */
#define TARGET_CDROMREADTOCHDR 0x5305 /* Read TOC header
(struct cdrom_tochdr) */
#define TARGET_CDROMREADTOCENTRY 0x5306 /* Read TOC entry
(struct cdrom_tocentry) */
#define TARGET_CDROMSTOP 0x5307 /* Stop the cdrom drive */
#define TARGET_CDROMSTART 0x5308 /* Start the cdrom drive */
#define TARGET_CDROMEJECT 0x5309 /* Ejects the cdrom media */
#define TARGET_CDROMVOLCTRL 0x530a /* Control output volume
(struct cdrom_volctrl) */
#define TARGET_CDROMSUBCHNL 0x530b /* Read subchannel data
(struct cdrom_subchnl) */
#define TARGET_CDROMREADMODE2 0x530c /* Read TARGET_CDROM mode 2 data (2336 Bytes)
(struct cdrom_read) */
#define TARGET_CDROMREADMODE1 0x530d /* Read TARGET_CDROM mode 1 data (2048 Bytes)
(struct cdrom_read) */
#define TARGET_CDROMREADAUDIO 0x530e /* (struct cdrom_read_audio) */
#define TARGET_CDROMEJECT_SW 0x530f /* enable(1)/disable(0) auto-ejecting */
#define TARGET_CDROMMULTISESSION 0x5310 /* Obtain the start-of-last-session
address of multi session disks
(struct cdrom_multisession) */
#define TARGET_CDROM_GET_MCN 0x5311 /* Obtain the "Universal Product Code"
if available (struct cdrom_mcn) */
#define TARGET_CDROM_GET_UPC TARGET_CDROM_GET_MCN /* This one is depricated,
but here anyway for compatability */
#define TARGET_CDROMRESET 0x5312 /* hard-reset the drive */
#define TARGET_CDROMVOLREAD 0x5313 /* Get the drive's volume setting
(struct cdrom_volctrl) */
#define TARGET_CDROMREADRAW 0x5314 /* read data in raw mode (2352 Bytes)
(struct cdrom_read) */
/*
* These ioctls are used only used in aztcd.c and optcd.c
*/
#define TARGET_CDROMREADCOOKED 0x5315 /* read data in cooked mode */
#define TARGET_CDROMSEEK 0x5316 /* seek msf address */
/*
* This ioctl is only used by the scsi-cd driver.
It is for playing audio in logical block addressing mode.
*/
#define TARGET_CDROMPLAYBLK 0x5317 /* (struct cdrom_blk) */
/*
* These ioctls are only used in optcd.c
*/
#define TARGET_CDROMREADALL 0x5318 /* read all 2646 bytes */
/*
* These ioctls are (now) only in ide-cd.c for controlling
* drive spindown time. They should be implemented in the
* Uniform driver, via generic packet commands, GPCMD_MODE_SELECT_10,
* GPCMD_MODE_SENSE_10 and the GPMODE_POWER_PAGE...
* -Erik
*/
#define TARGET_CDROMGETSPINDOWN 0x531d
#define TARGET_CDROMSETSPINDOWN 0x531e
/*
* These ioctls are implemented through the uniform CD-ROM driver
* They _will_ be adopted by all CD-ROM drivers, when all the CD-ROM
* drivers are eventually ported to the uniform CD-ROM driver interface.
*/
#define TARGET_CDROMCLOSETRAY 0x5319 /* pendant of CDROMEJECT */
#define TARGET_CDROM_SET_OPTIONS 0x5320 /* Set behavior options */
#define TARGET_CDROM_CLEAR_OPTIONS 0x5321 /* Clear behavior options */
#define TARGET_CDROM_SELECT_SPEED 0x5322 /* Set the CD-ROM speed */
#define TARGET_CDROM_SELECT_DISC 0x5323 /* Select disc (for juke-boxes) */
#define TARGET_CDROM_MEDIA_CHANGED 0x5325 /* Check is media changed */
#define TARGET_CDROM_DRIVE_STATUS 0x5326 /* Get tray position, etc. */
#define TARGET_CDROM_DISC_STATUS 0x5327 /* Get disc type, etc. */
#define TARGET_CDROM_CHANGER_NSLOTS 0x5328 /* Get number of slots */
#define TARGET_CDROM_LOCKDOOR 0x5329 /* lock or unlock door */
#define TARGET_CDROM_DEBUG 0x5330 /* Turn debug messages on/off */
#define TARGET_CDROM_GET_CAPABILITY 0x5331 /* get capabilities */
/* Note that scsi/scsi_ioctl.h also uses 0x5382 - 0x5386.
* Future CDROM ioctls should be kept below 0x537F
*/
/* This ioctl is only used by sbpcd at the moment */
#define TARGET_CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */
/* conflict with SCSI_IOCTL_GET_IDLUN */
/* DVD-ROM Specific ioctls */
#define TARGET_DVD_READ_STRUCT 0x5390 /* Read structure */
#define TARGET_DVD_WRITE_STRUCT 0x5391 /* Write structure */
#define TARGET_DVD_AUTH 0x5392 /* Authentication */
#define TARGET_CDROM_SEND_PACKET 0x5393 /* send a packet to the drive */
#define TARGET_CDROM_NEXT_WRITABLE 0x5394 /* get next writable block */
#define TARGET_CDROM_LAST_WRITTEN 0x5395 /* get last block written on disc */
/* HD commands */
/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x030n/0x031n */
#define TARGET_HDIO_GETGEO 0x0301 /* get device geometry */
#define TARGET_HDIO_GET_UNMASKINTR 0x0302 /* get current unmask setting */
#define TARGET_HDIO_GET_MULTCOUNT 0x0304 /* get current IDE blockmode setting */
#define TARGET_HDIO_GET_IDENTITY 0x0307 /* get IDE identification info */
#define TARGET_HDIO_GET_KEEPSETTINGS 0x0308 /* get keep-settings-on-reset flag */
#define TARGET_HDIO_GET_32BIT 0x0309 /* get current io_32bit setting */
#define TARGET_HDIO_GET_NOWERR 0x030a /* get ignore-write-error flag */
#define TARGET_HDIO_GET_DMA 0x030b /* get use-dma flag */
#define TARGET_HDIO_DRIVE_CMD 0x031f /* execute a special drive command */
/* hd/ide ctl's that pass (arg) non-ptr values are numbered 0x032n/0x033n */
#define TARGET_HDIO_SET_MULTCOUNT 0x0321 /* change IDE blockmode */
#define TARGET_HDIO_SET_UNMASKINTR 0x0322 /* permit other irqs during I/O */
#define TARGET_HDIO_SET_KEEPSETTINGS 0x0323 /* keep ioctl settings on reset */
#define TARGET_HDIO_SET_32BIT 0x0324 /* change io_32bit flags */
#define TARGET_HDIO_SET_NOWERR 0x0325 /* change ignore-write-error flag */
#define TARGET_HDIO_SET_DMA 0x0326 /* change use-dma flag */
#define TARGET_HDIO_SET_PIO_MODE 0x0327 /* reconfig interface to new speed */