qemu/hw/pci-bridge/Makefile.objs
Peter Maydell 5459ef3bff ppc patch queue 2017-02-02
This obsoletes ppc-for-2.9-20170112, which had a MacOS build bug.
 
 This is a long overdue ppc pull request for qemu-2.9.  It's been a
 long time coming due to some holidays and inconveniently timed
 problems with testing.  So, there's a lot in here:
 
     * More POWER9 instruction implementations for TCG
     * The simpler parts of my CPU compatibility mode cleanup
         * This changes behaviour to prefer compatibility modes over
           "raW" mode for new machine type versions
     * New "40p" machine type which is essentially a modernized and
       cleaned up "prep".  The intention is that it will replace "prep"
       once it has some more testing and polish.
     * Add pseries-2.9 machine type
     * Implement H_SIGNAL_SYS_RESET hypercall
     * Consolidate the two alternate CPU init paths in pseries by
       making it always go through CPU core objects to initialize CPU
     * A number of bugfixes and cleanups
     * Stop the guest timebase when the guest is stopped under KVM.
       This makes the guest system clock also stop when paused, which
       matches the x86 behaviour.
     * Some preliminary cleanups leading towards implementation of the
       POWER9 MMU.
 
 There are also some changes not strictly related to ppc code, but for
 its benefit:
 
     * Limit the pxi-expander-bridge (PXB) device to x86 guests only
       (it's essentially a hack to work around historical x86
       limitations)
     * Some additions to the 128-bit math in host_utils, necessary for
       some of the new instructions.
     * Revise a number of qtests and enable them for ppc
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJYko4AAAoJEGw4ysog2bOStEYQAIk0Pd6ifZzJUcTWQaR8+AZ7
 nTbzQyWtSHqSAiwBNsykJMFXV1liZVglf2e+VBsrVOwKoU50VOyVm5LspG2z1h8N
 Rxe4FGA2MA//2F3+9/AP8Oe3RdsClNCDaXAVuCFRP4xQWxqqwwasChDeS4Ph/cZq
 CXnlhKTpk9v5vSCsr64bUOSYh3RPumnQepiBgT82hOo7R+VaJ79AFbTeCYKkd0hY
 Sq8g3mg0zOX1ekNXPk1h8oZWqkoZGbqKiXgoy/evGXWURVzTSJO6VTyM65tdwWB7
 Zds77gYAYCIYKq+Iwv4iBCmo4KJofjKQcQepQUr+eGDv9syXebtp6fY0btnIS+DX
 uGzzaixZNms9r2+FAiIlKwIeQgQvl76lYEGmvBrbrgSOyA/7GAkOId0E0Ul6D5LW
 EJSwk9ZDbyE0JBEq6Bx+LClpwye+bpdScU26djQTTcWpFApIeJTyG9V6b1xwulVZ
 rw68ZvfMYxktkvhTbEtvk2O9YZI5eQStBJkmJXeOiOduiP93aiC82MM1Jp+82Q1E
 4qRVvCpGTwzF3GLFciUKAqmwfYxByo4G0/dwG8qw6WNEemLyXFHV5TkzLhgwl3kC
 gDGl5AdH4MXj8NRjuHcDiGXfePBCD578dmz4xo5ZLA2yBavxkRzM8QsEUmD8hf5w
 jhLgyKt0G2hNNtOnGOdG
 =vLVl
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170202' into staging

ppc patch queue 2017-02-02

This obsoletes ppc-for-2.9-20170112, which had a MacOS build bug.

This is a long overdue ppc pull request for qemu-2.9.  It's been a
long time coming due to some holidays and inconveniently timed
problems with testing.  So, there's a lot in here:

    * More POWER9 instruction implementations for TCG
    * The simpler parts of my CPU compatibility mode cleanup
        * This changes behaviour to prefer compatibility modes over
          "raW" mode for new machine type versions
    * New "40p" machine type which is essentially a modernized and
      cleaned up "prep".  The intention is that it will replace "prep"
      once it has some more testing and polish.
    * Add pseries-2.9 machine type
    * Implement H_SIGNAL_SYS_RESET hypercall
    * Consolidate the two alternate CPU init paths in pseries by
      making it always go through CPU core objects to initialize CPU
    * A number of bugfixes and cleanups
    * Stop the guest timebase when the guest is stopped under KVM.
      This makes the guest system clock also stop when paused, which
      matches the x86 behaviour.
    * Some preliminary cleanups leading towards implementation of the
      POWER9 MMU.

There are also some changes not strictly related to ppc code, but for
its benefit:

    * Limit the pxi-expander-bridge (PXB) device to x86 guests only
      (it's essentially a hack to work around historical x86
      limitations)
    * Some additions to the 128-bit math in host_utils, necessary for
      some of the new instructions.
    * Revise a number of qtests and enable them for ppc

# gpg: Signature made Thu 02 Feb 2017 01:40:16 GMT
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.9-20170202: (107 commits)
  hw/ppc/pnv: Use error_report instead of hw_error if a ROM file can't be found
  ppc/kvm: Handle the "family" CPU via alias instead of registering new types
  target/ppc/mmu_hash64: Fix incorrect shift value in amr calculation
  target/ppc/mmu_hash64: Fix printing unsigned as signed int
  tcg/POWER9: NOOP the cp_abort instruction
  target/ppc/debug: Print LPCR register value if register exists
  target-ppc: Add xststdc[sp, dp, qp] instructions
  target-ppc: Add xvtstdc[sp,dp] instructions
  target-ppc: Add MMU model check for booke machines
  ppc: switch to constants within BUILD_BUG_ON
  target/ppc/cpu-models: Fix/remove bad CPU aliases
  target/ppc: Remove unused POWERPC_FAMILY(POWER)
  spapr: clock should count only if vm is running
  ppc: Remove unused function cpu_ppc601_rtc_init()
  target/ppc: Add pcr_supported to POWER9 cpu class definition
  powerpc/cpu-models: rename ISAv3.00 logical PVR definition
  target-ppc: Add xvcv[hpsp, sphp] instructions
  target-ppc: Add xsmulqp instruction
  target-ppc: Add xsdivqp instruction
  target-ppc: Add xscvsdqp and xscvudqp instructions
  ...

# Conflicts:
#	hw/pci-bridge/Makefile.objs

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-02 18:48:06 +00:00

9 lines
373 B
Makefile

common-obj-y += pci_bridge_dev.o
common-obj-$(CONFIG_PCIE_PORT) += pcie_root_port.o gen_pcie_root_port.o
common-obj-$(CONFIG_PXB) += pci_expander_bridge.o
common-obj-$(CONFIG_XIO3130) += xio3130_upstream.o xio3130_downstream.o
common-obj-$(CONFIG_IOH3420) += ioh3420.o
common-obj-$(CONFIG_I82801B11) += i82801b11.o
# NewWorld PowerMac
common-obj-$(CONFIG_DEC_PCI) += dec.o