Guenter Roeck df3f5efe10 hw/net/imx_fec: Support two Ethernet interfaces connected to single MDIO bus ... The SOC on i.MX6UL and i.MX7 has 2 Ethernet interfaces. The PHY on each may be connected to separate MDIO busses, or both may be connected on the same MDIO bus using different PHY addresses. Commit 461c51ad42 ("Add a phy-num property to the i.MX FEC emulator") added support for specifying PHY addresses, but it did not provide support for linking the second PHY on a given MDIO bus to the other Ethernet interface. To be able to support two PHY instances on a single MDIO bus, two properties are needed: First, there needs to be a flag indicating if the MDIO bus on a given Ethernet interface is connected. If not, attempts to read from this bus must always return 0xffff. Implement this property as phy-connected. Second, if the MDIO bus on an interface is active, it needs a link to the consumer interface to be able to provide PHY access for it. Implement this property as phy-consumer. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20230315145248.1639364-2-linux@roeck-us.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>		2023-04-20 10:25:43 +01:00
..
allwinner-sun8i-emac.h
allwinner_emac.h
cadence_gem.h
ftgmac100.h
imx_fec.h	hw/net/imx_fec: Support two Ethernet interfaces connected to single MDIO bus	2023-04-20 10:25:43 +01:00
lan9118.h
lance.h
lasi_82596.h
mii.h	fsl_etsec: Use hw/net/mii.h	2023-03-10 15:35:38 +08:00
msf2-emac.h
mv88w8618_eth.h
ne2000-isa.h
npcm7xx_emc.h
smc91c111.h
xlnx-zynqmp-can.h