qemu/include/hw/net/npcm7xx_emc.h
Philippe Mathieu-Daudé c79aa350ea hw/arm/npcm7xx: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE()
NPCM7XX models have been commited after the conversion from
commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible").
Manually convert them.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109140306.23161-11-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12 17:15:09 +00:00

284 lines
7.4 KiB
C

/*
* Nuvoton NPCM7xx EMC Module
*
* Copyright 2020 Google LLC
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*/
#ifndef NPCM7XX_EMC_H
#define NPCM7XX_EMC_H
#include "hw/irq.h"
#include "hw/sysbus.h"
#include "net/net.h"
/* 32-bit register indices. */
enum NPCM7xxPWMRegister {
/* Control registers. */
REG_CAMCMR,
REG_CAMEN,
/* There are 16 CAMn[ML] registers. */
REG_CAMM_BASE,
REG_CAML_BASE,
REG_CAMML_LAST = 0x21,
REG_TXDLSA = 0x22,
REG_RXDLSA,
REG_MCMDR,
REG_MIID,
REG_MIIDA,
REG_FFTCR,
REG_TSDR,
REG_RSDR,
REG_DMARFC,
REG_MIEN,
/* Status registers. */
REG_MISTA,
REG_MGSTA,
REG_MPCNT,
REG_MRPC,
REG_MRPCC,
REG_MREPC,
REG_DMARFS,
REG_CTXDSA,
REG_CTXBSA,
REG_CRXDSA,
REG_CRXBSA,
NPCM7XX_NUM_EMC_REGS,
};
/* REG_CAMCMR fields */
/* Enable CAM Compare */
#define REG_CAMCMR_ECMP (1 << 4)
/* Complement CAM Compare */
#define REG_CAMCMR_CCAM (1 << 3)
/* Accept Broadcast Packet */
#define REG_CAMCMR_ABP (1 << 2)
/* Accept Multicast Packet */
#define REG_CAMCMR_AMP (1 << 1)
/* Accept Unicast Packet */
#define REG_CAMCMR_AUP (1 << 0)
/* REG_MCMDR fields */
/* Software Reset */
#define REG_MCMDR_SWR (1 << 24)
/* Internal Loopback Select */
#define REG_MCMDR_LBK (1 << 21)
/* Operation Mode Select */
#define REG_MCMDR_OPMOD (1 << 20)
/* Enable MDC Clock Generation */
#define REG_MCMDR_ENMDC (1 << 19)
/* Full-Duplex Mode Select */
#define REG_MCMDR_FDUP (1 << 18)
/* Enable SQE Checking */
#define REG_MCMDR_ENSEQ (1 << 17)
/* Send PAUSE Frame */
#define REG_MCMDR_SDPZ (1 << 16)
/* No Defer */
#define REG_MCMDR_NDEF (1 << 9)
/* Frame Transmission On */
#define REG_MCMDR_TXON (1 << 8)
/* Strip CRC Checksum */
#define REG_MCMDR_SPCRC (1 << 5)
/* Accept CRC Error Packet */
#define REG_MCMDR_AEP (1 << 4)
/* Accept Control Packet */
#define REG_MCMDR_ACP (1 << 3)
/* Accept Runt Packet */
#define REG_MCMDR_ARP (1 << 2)
/* Accept Long Packet */
#define REG_MCMDR_ALP (1 << 1)
/* Frame Reception On */
#define REG_MCMDR_RXON (1 << 0)
/* REG_MIEN fields */
/* Enable Transmit Descriptor Unavailable Interrupt */
#define REG_MIEN_ENTDU (1 << 23)
/* Enable Transmit Completion Interrupt */
#define REG_MIEN_ENTXCP (1 << 18)
/* Enable Transmit Interrupt */
#define REG_MIEN_ENTXINTR (1 << 16)
/* Enable Receive Descriptor Unavailable Interrupt */
#define REG_MIEN_ENRDU (1 << 10)
/* Enable Receive Good Interrupt */
#define REG_MIEN_ENRXGD (1 << 4)
/* Enable Receive Interrupt */
#define REG_MIEN_ENRXINTR (1 << 0)
/* REG_MISTA fields */
/* TODO: Add error fields and support simulated errors? */
/* Transmit Bus Error Interrupt */
#define REG_MISTA_TXBERR (1 << 24)
/* Transmit Descriptor Unavailable Interrupt */
#define REG_MISTA_TDU (1 << 23)
/* Transmit Completion Interrupt */
#define REG_MISTA_TXCP (1 << 18)
/* Transmit Interrupt */
#define REG_MISTA_TXINTR (1 << 16)
/* Receive Bus Error Interrupt */
#define REG_MISTA_RXBERR (1 << 11)
/* Receive Descriptor Unavailable Interrupt */
#define REG_MISTA_RDU (1 << 10)
/* DMA Early Notification Interrupt */
#define REG_MISTA_DENI (1 << 9)
/* Maximum Frame Length Interrupt */
#define REG_MISTA_DFOI (1 << 8)
/* Receive Good Interrupt */
#define REG_MISTA_RXGD (1 << 4)
/* Packet Too Long Interrupt */
#define REG_MISTA_PTLE (1 << 3)
/* Receive Interrupt */
#define REG_MISTA_RXINTR (1 << 0)
/* REG_MGSTA fields */
/* Transmission Halted */
#define REG_MGSTA_TXHA (1 << 11)
/* Receive Halted */
#define REG_MGSTA_RXHA (1 << 11)
/* REG_DMARFC fields */
/* Maximum Receive Frame Length */
#define REG_DMARFC_RXMS(word) extract32((word), 0, 16)
/* REG MIIDA fields */
/* Busy Bit */
#define REG_MIIDA_BUSY (1 << 17)
/* Transmit and receive descriptors */
typedef struct NPCM7xxEMCTxDesc NPCM7xxEMCTxDesc;
typedef struct NPCM7xxEMCRxDesc NPCM7xxEMCRxDesc;
struct NPCM7xxEMCTxDesc {
uint32_t flags;
uint32_t txbsa;
uint32_t status_and_length;
uint32_t ntxdsa;
};
struct NPCM7xxEMCRxDesc {
uint32_t status_and_length;
uint32_t rxbsa;
uint32_t reserved;
uint32_t nrxdsa;
};
/* NPCM7xxEMCTxDesc.flags values */
/* Owner: 0 = cpu, 1 = emc */
#define TX_DESC_FLAG_OWNER_MASK (1 << 31)
/* Transmit interrupt enable */
#define TX_DESC_FLAG_INTEN (1 << 2)
/* CRC append */
#define TX_DESC_FLAG_CRCAPP (1 << 1)
/* Padding enable */
#define TX_DESC_FLAG_PADEN (1 << 0)
/* NPCM7xxEMCTxDesc.status_and_length values */
/* Collision count */
#define TX_DESC_STATUS_CCNT_SHIFT 28
#define TX_DESC_STATUS_CCNT_BITSIZE 4
/* SQE error */
#define TX_DESC_STATUS_SQE (1 << 26)
/* Transmission paused */
#define TX_DESC_STATUS_PAU (1 << 25)
/* P transmission halted */
#define TX_DESC_STATUS_TXHA (1 << 24)
/* Late collision */
#define TX_DESC_STATUS_LC (1 << 23)
/* Transmission abort */
#define TX_DESC_STATUS_TXABT (1 << 22)
/* No carrier sense */
#define TX_DESC_STATUS_NCS (1 << 21)
/* Defer exceed */
#define TX_DESC_STATUS_EXDEF (1 << 20)
/* Transmission complete */
#define TX_DESC_STATUS_TXCP (1 << 19)
/* Transmission deferred */
#define TX_DESC_STATUS_DEF (1 << 17)
/* Transmit interrupt */
#define TX_DESC_STATUS_TXINTR (1 << 16)
#define TX_DESC_PKT_LEN(word) extract32((word), 0, 16)
/* Transmit buffer start address */
#define TX_DESC_TXBSA(word) ((uint32_t) (word) & ~3u)
/* Next transmit descriptor start address */
#define TX_DESC_NTXDSA(word) ((uint32_t) (word) & ~3u)
/* NPCM7xxEMCRxDesc.status_and_length values */
/* Owner: 0b00 = cpu, 0b01 = undefined, 0b10 = emc, 0b11 = undefined */
#define RX_DESC_STATUS_OWNER_SHIFT 30
#define RX_DESC_STATUS_OWNER_BITSIZE 2
#define RX_DESC_STATUS_OWNER_MASK (3 << RX_DESC_STATUS_OWNER_SHIFT)
/* Runt packet */
#define RX_DESC_STATUS_RP (1 << 22)
/* Alignment error */
#define RX_DESC_STATUS_ALIE (1 << 21)
/* Frame reception complete */
#define RX_DESC_STATUS_RXGD (1 << 20)
/* Packet too long */
#define RX_DESC_STATUS_PTLE (1 << 19)
/* CRC error */
#define RX_DESC_STATUS_CRCE (1 << 17)
/* Receive interrupt */
#define RX_DESC_STATUS_RXINTR (1 << 16)
#define RX_DESC_PKT_LEN(word) extract32((word), 0, 16)
/* Receive buffer start address */
#define RX_DESC_RXBSA(word) ((uint32_t) (word) & ~3u)
/* Next receive descriptor start address */
#define RX_DESC_NRXDSA(word) ((uint32_t) (word) & ~3u)
/* Minimum packet length, when TX_DESC_FLAG_PADEN is set. */
#define MIN_PACKET_LENGTH 64
struct NPCM7xxEMCState {
/*< private >*/
SysBusDevice parent;
/*< public >*/
MemoryRegion iomem;
qemu_irq tx_irq;
qemu_irq rx_irq;
NICState *nic;
NICConf conf;
/* 0 or 1, for log messages */
uint8_t emc_num;
uint32_t regs[NPCM7XX_NUM_EMC_REGS];
/*
* tx is active. Set to true by TSDR and then switches off when out of
* descriptors. If the TXON bit in REG_MCMDR is off then this is off.
*/
bool tx_active;
/*
* rx is active. Set to true by RSDR and then switches off when out of
* descriptors. If the RXON bit in REG_MCMDR is off then this is off.
*/
bool rx_active;
};
#define TYPE_NPCM7XX_EMC "npcm7xx-emc"
OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxEMCState, NPCM7XX_EMC)
#endif /* NPCM7XX_EMC_H */