qemu/include/hw/riscv/sifive_uart.h
Nathaniel Graff 40061ac0bc
sifive_uart: Implement interrupt pending register
The watermark bits are set in the interrupt pending register according
to the configuration of txcnt and rxcnt in the txctrl and rxctrl
registers.

Since the UART TX does not implement a FIFO, the txwm bit is set as long
as the TX watermark level is greater than zero.

Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-20 12:08:43 -08:00

75 lines
2.1 KiB
C

/*
* SiFive UART interface
*
* Copyright (c) 2016 Stefan O'Rear
* Copyright (c) 2017 SiFive, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2 or later, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef HW_SIFIVE_UART_H
#define HW_SIFIVE_UART_H
enum {
SIFIVE_UART_TXFIFO = 0,
SIFIVE_UART_RXFIFO = 4,
SIFIVE_UART_TXCTRL = 8,
SIFIVE_UART_TXMARK = 10,
SIFIVE_UART_RXCTRL = 12,
SIFIVE_UART_RXMARK = 14,
SIFIVE_UART_IE = 16,
SIFIVE_UART_IP = 20,
SIFIVE_UART_DIV = 24,
SIFIVE_UART_MAX = 32
};
enum {
SIFIVE_UART_IE_TXWM = 1, /* Transmit watermark interrupt enable */
SIFIVE_UART_IE_RXWM = 2 /* Receive watermark interrupt enable */
};
enum {
SIFIVE_UART_IP_TXWM = 1, /* Transmit watermark interrupt pending */
SIFIVE_UART_IP_RXWM = 2 /* Receive watermark interrupt pending */
};
#define SIFIVE_UART_GET_TXCNT(txctrl) ((txctrl >> 16) & 0x7)
#define SIFIVE_UART_GET_RXCNT(rxctrl) ((rxctrl >> 16) & 0x7)
#define TYPE_SIFIVE_UART "riscv.sifive.uart"
#define SIFIVE_UART(obj) \
OBJECT_CHECK(SiFiveUARTState, (obj), TYPE_SIFIVE_UART)
typedef struct SiFiveUARTState {
/*< private >*/
SysBusDevice parent_obj;
/*< public >*/
qemu_irq irq;
MemoryRegion mmio;
CharBackend chr;
uint8_t rx_fifo[8];
unsigned int rx_fifo_len;
uint32_t ie;
uint32_t ip;
uint32_t txctrl;
uint32_t rxctrl;
uint32_t div;
} SiFiveUARTState;
SiFiveUARTState *sifive_uart_create(MemoryRegion *address_space, hwaddr base,
Chardev *chr, qemu_irq irq);
#endif